Hit the Road, with Care

Statistics point to increasingly dangerous roadways.

IF you and your family travel by car this summer, be sure to watch out for work zones. And keep this tidbit in mind: There's about a one-in-four chance each tractor-trailer you encounter has a problem that would cause an inspector to order it out of service. (In fairness, studies also have found a significant percentage of America's passenger cars aren't well maintained and present safety risks on the road.)

Two recent reports got me thinking about the safety of large trucks. The commercial trucking industry applauded when the U.S. Department of Transportation's inspector general challenged SafeStat, a database used by the Federal Motor Carrier Safety Administration to target truck and bus companies for safety inspections and enforcement. In fact, what the IG's audit found wasn't good news: Six states reported no large-truck wrecks at all for the six months in question. Thousands of crashes were missing from the database. About 98,000 motor carriers, 15 percent of the active carriers in the country, were recorded in SafeStat as having zero drivers (yet somehow, 15,136 of these driverless companies underwent at least one inspection from October 2001 through September 2002).

Given the gaps in SafeStat's data, perhaps I shouldn't rely on the other report that concerns me, for it, too, comes from the Federal Motor Carrier Safety Administration. The agency released "Commercial Motor Vehicle Facts," containing data for fiscal years 1997 through 2003, this spring. The report lists 2002 fatality rates of 2.3 for large trucks and 1.5 for all vehicles per 100 million miles. Their injury rates were the reverse: 60.5 for large trucks and 102.5 for all vehicles per 100 million miles.

Ricin blackmail notwithstanding, the government's revised hours of service rule took effect in early March. FMCSA's report estimated 100 percent compliance with hours of service rules by commercial truckers in 2002 would have saved 75 to 120 lives. Fatigue-related crashes that year cost $2.3 billion (in 1999 dollars), the agency said. Particularly interesting was its chart of FY2003 roadside inspections and out-of-service (OOS) rates for large trucks and commercial buses:

Large Trucks

Commercial Buses

Driver inspections

2,962,274

24,637

Driver OOS rate

6.9 %

5.7 %

Vehicle inspections

2,115,384

35,584

Vehicle OOS rate

23.2 %

10.3 %

With those numbers in mind, all of us should "Watch out for the other guy" a lot more carefully.

This article originally appeared in the June 2004 issue of Occupational Health & Safety.

About the Author

Jerry Laws is Editor of Occupational Health & Safety magazine, which is owned by 1105 Media Inc.

Product Showcase

  • Magid® D-ROC® GPD412 21G Ultra-Thin Polyurethane Palm Coated Work Gloves

    Magid’s 21G line is more than just a 21-gauge glove, it’s a revolutionary knitting technology paired with an advanced selection of innovative fibers to create the ultimate in lightweight cut protection. The latest offering in our 21G line provides ANSI A4 cut resistance with unparalleled dexterity and extreme comfort that no other 21-gauge glove on the market can offer! 3

  • Safety Knives

    The Safety Knife Company has developed a quality range of safety knives for all industries. Designed so that fingers cannot get to the blades, these knives will safely cut through cardboard, tape, strapping, shrink or plastic wrap or a variety of other packing materials. Because these knives have no exposed blades and only cut cardboard deep, they will not only protect employees against lacerations but they will also save product. The Metal Detectable versions have revolutionary metal detectable polypropylene knife bodies specifically for the food and pharmaceutical industries. This material can be detected and rejected by typical detection machines and is X-ray visible. 3

  • The MGC Simple Plus

    The MGC Simple Plus is a simple-to-use, portable multi gas detector that runs continuously for three years without being recharged or routinely calibrated after its initial charge and calibration during manufacturing. The detector reliably tests a worksite’s atmosphere for hydrogen sulfide, carbon monoxide, oxygen and combustible gases (LEL). Its durability enables the detector to withstand the harshest treatment and environments, hence earning it an IP 68 rating. The MGC Simple Plus is also compatible with a variety of accessories, such as the GCT External Pump. Visit gascliptech.com for more information. 3

Featured

Webinars